ApfelNetzwerk/embedded/components/network/include/zh_network.h
2024-10-11 20:28:10 +02:00

127 lines
6.2 KiB
C

#pragma once
#include "string.h"
#include "esp_err.h"
#include "esp_timer.h"
#include "esp_wifi.h"
#include "esp_now.h"
#include "freertos/FreeRTOS.h"
#include "freertos/event_groups.h"
#include "esp_log.h"
#include "esp_heap_caps.h"
#include "zh_vector.h"
#ifdef CONFIG_IDF_TARGET_ESP8266
#include "esp_system.h"
#else
#include "esp_random.h"
#include "esp_mac.h"
#endif
#define ZH_NETWORK_MAX_MESSAGE_SIZE 218 // Maximum value of the transmitted data size. @attention All devices on the network must have the same ZH_NETWORK_MAX_MESSAGE_SIZE.
#define ZH_NETWORK_INIT_CONFIG_DEFAULT() \
{ \
.network_id = 0xFAFBFCFD, \
.task_priority = 4, \
.stack_size = 3072, \
.queue_size = 32, \
.max_waiting_time = 1000, \
.id_vector_size = 100, \
.route_vector_size = 100, \
.wifi_interface = WIFI_IF_STA, \
.wifi_channel = 1, \
.attempts = 3 \
}
#ifdef __cplusplus
extern "C"
{
#endif
typedef struct // Structure for initial initialization of ESP-NOW interface.
{
uint32_t network_id; // A unique ID for the mesh network. @attention The ID must be the same for all nodes in the network.
uint8_t task_priority; // Task priority for the ESP-NOW messages processing. @note It is not recommended to set a value less than 4.
uint16_t stack_size; // Stack size for task for the ESP-NOW messages processing. @note The minimum size is 3072 bytes.
uint8_t queue_size; // Queue size for task for the ESP-NOW messages processing. @note The size depends on the number of messages to be processed. It is not recommended to set the value less than 32.
uint16_t max_waiting_time; // Maximum time to wait a response message from target node (in milliseconds). @note If a response message from the target node is not received within this time, the status of the sent message will be "sent fail".
uint16_t id_vector_size; // Maximum size of unique ID of received messages. @note If the size is exceeded, the first value will be deleted. Minimum recommended value: number of planned nodes in the network + 10%.
uint16_t route_vector_size; // The maximum size of the routing table. @note If the size is exceeded, the first route will be deleted. Minimum recommended value: number of planned nodes in the network + 10%.
wifi_interface_t wifi_interface; // WiFi interface (STA or AP) used for ESP-NOW operation. @note The MAC address of the device depends on the selected WiFi interface.
uint8_t wifi_channel; // Wi-Fi channel uses to send/receive ESPNOW data. @note Values from 1 to 14.
uint8_t attempts; // Maximum number of attempts to send a message. @note It is not recommended to set a value greater than 5.
} zh_network_init_config_t;
ESP_EVENT_DECLARE_BASE(ZH_NETWORK);
typedef enum // Enumeration of possible ESP-NOW events.
{
ZH_NETWORK_ON_RECV_EVENT, // The event when the ESP-NOW message was received.
ZH_NETWORK_ON_SEND_EVENT // The event when the ESP-NOW message was sent.
} zh_network_event_type_t;
typedef enum // Enumeration of possible status of sent ESP-NOW message.
{
ZH_NETWORK_SEND_SUCCESS, // If ESP-NOW message was sent success.
ZH_NETWORK_SEND_FAIL // If ESP-NOW message was sent fail.
} zh_network_on_send_event_type_t;
typedef struct // Structure for sending data to the event handler when an ESP-NOW message was sent. @note Should be used with ZH_NETWORK event base and ZH_NETWORK_ON_SEND_EVENT event.
{
uint8_t mac_addr[6]; // MAC address of the device to which the ESP-NOW message was sent.
zh_network_on_send_event_type_t status; // Status of sent ESP-NOW message.
} zh_network_event_on_send_t;
typedef struct // Structure for sending data to the event handler when an ESP-NOW message was received. @note Should be used with ZH_NETWORK event base and ZH_NETWORK_ON_RECV_EVENT event.
{
uint8_t mac_addr[6]; // MAC address of the sender ESP-NOW message.
uint8_t *data; // Pointer to the data of the received ESP-NOW message.
uint8_t data_len; // Size of the received ESP-NOW message.
} zh_network_event_on_recv_t;
/**
* @brief Initialize ESP-NOW interface.
*
* @note Before initialize ESP-NOW interface recommend initialize zh_network_init_config_t structure with default values.
*
* @code zh_network_init_config_t config = ZH_NETWORK_INIT_CONFIG_DEFAULT() @endcode
*
* @param[in] config Pointer to ESP-NOW initialized configuration structure. Can point to a temporary variable.
*
* @return
* - ESP_OK if initialization was success
* - ESP_ERR_INVALID_ARG if parameter error
* - ESP_ERR_WIFI_NOT_INIT if WiFi is not initialized
* - ESP_FAIL if any internal error
*/
esp_err_t zh_network_init(const zh_network_init_config_t *config);
/**
* @brief Deinitialize ESP-NOW interface.
*
* @return
* - ESP_OK if deinitialization was success
* - ESP_FAIL if ESP-NOW is not initialized
*/
esp_err_t zh_network_deinit(void);
/**
* @brief Send ESP-NOW data.
*
* @param[in] target Pointer to a buffer containing an eight-byte target MAC. Can be NULL for broadcast.
* @param[in] data Pointer to a buffer containing the data for send.
* @param[in] data_len Sending data length.
*
* @note The function will return an ESP_ERR_INVALID_STATE error if less than 50% of the size set at initialization remains in the message queue.
*
* @return
* - ESP_OK if sent was success
* - ESP_ERR_INVALID_ARG if parameter error
* - ESP_ERR_INVALID_STATE if queue for outgoing data is almost full
* - ESP_FAIL if ESP-NOW is not initialized or any internal error
*/
esp_err_t zh_network_send(const uint8_t *target, const uint8_t *data, const uint8_t data_len);
#ifdef __cplusplus
}
#endif